seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Over-centre spring: removing and fitting > < Removing

Leon Mk2

Assembly and adjustment
Assembly and adjustment
   
–  Before fitting the clutch pedal switch -F36- the entire rod must be removed -3-.
l  The pedal -4- must be in rest position.
–  Insert the clutch pedal switch -F36- through the installation hole, pressing it against the clutch pedal and securing it by rotating 45° to the right.
–  Plug in the connector of the clutch pedal switch -F36-.
–  Install footwell cover on driver side → body - inner assembly work; Rep. Gr.68.
  N30-10073

Over-centre spring: removing and fitting > < Removing