SEAT Workshop Service and Repair Manuals > Leon Mk2 > 02T 5-speed manual gearbox | Clutch, control | Clutch release assembly, clutch slave cylinder: repairs

Clutch system: bleeding of air

Check the tool and equipment equivalence table according to the applicability between Seat / VW / Audi / Skoda → Chapter.

Special tools and workshop equipment required

t	Brake bleeder -SAT 1175B-, see equivalent → Anchor

t	Purge tube -VAG 1238/B3-, see equivalent → Anchor

Only use new brake fluid. Brake fluid specification → Booklet1.

Note

If required, the 670 mm bleeding hose -VAG 1238/B3- should be used to bleed air from the system.

–	Connect pressure hose to the brake fluid reservoir.

–	Fit enough lint-free cloths around the clutch slave cylinder. Brake fluid must not enter the gearbox.

–	Insert the bleed tube into the clutch slave cylinder -arrow- and open the bleed valve.

–	After finishing air bleeding, the clutch pedal must be activated several times.

SEAT Workshop Service and Repair Manuals