Leon Mk2
Cover for gearbox casing and 5th gear: Assembly overview |
1 - | Gearbox |
2 - | 5th gear mobile pinion |
q | Fitting position: the collar should be orientated towards the gearbox casing cover → Item |
q | removing and fitting → Chapter |
3 - | Circlip |
q | replace |
q | Determining thickness → Anchor |
q | removing and fitting → Chapter |
4 - | Seal |
q | replace |
5 - | Gearbox housing cover |
q | removing and fitting → Chapter |
6 - | 5 Nm +1/4 turn further (90º) |
q | replace |
7 - | Circlip |
q | replace |
q | Determining thickness → Fig. |
8 - | Synchronising hub with locking collar and check ring for 5th gear |
q | Dismantling and assembling → Chapter. |
9 - | Synchromesh ring of 5th gear: |
10 - | 5th gear mobile pinion |
11 - | Needle bearing |
q | For 5th gear |
12 - | Selector fork for 5th gear |
q | Dismantling and assembling → Chapter. |
13 - | Bearing pin |
q | For the selector fork of 5th gear |