Leon Mk2
5th gear: Assembly overview |
1 - | Sleeve |
q | For the needle bearing of 5th gear |
q | Release along with the rigid radial bearing bush allotment → Chapter |
q | Replace along with → Item |
2 - | Needle bearing |
q | For 5th gear |
q | removing and fitting → Chapter |
q | Replace along with → Item |
3 - | 5th gear mobile pinion |
q | removing and fitting → Chapter |
4 - | Synchromesh ring of 5th gear: |
q | removing and fitting → Chapter |
q | Check for wear → Chapter |
5 - | Mobile sleeve with 5th gear synchromesh |
q | removing and fitting → Chapter |
q | Dismantling and assembling → Chapter. |
6 - | Circlip |
q | replace |
q | Determining thickness → Fig. |
7 - | Stop ring |
q | Prevents locking pieces from moving out |
q | removing and fitting → Chapter |
8 - | Spring |
q | Fitting position: the bent end should point towards the locking pin |
9 - | Mobile sleeve of 5th gear |
10 - | Synchromesh for 5th gear |
11 - | Locking keyways |
q | 3 off |
12 - | Spring |
q | Fitting position: the bent end should point towards the locking pin |