seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Flanged shaft oil seals: removing and installing > < Articulation flange oilseals: removing and fitting|Removal

Leon Mk2

Installation
Installation
–  Lubricate the oilseal conveniently.
   
–  Fit oilseal with tool -U-40091-.
  Note!
Tool -U-40091- has different diameters to fit different oilseals. Select the correct one.
–  Fit the articulation flange with the spring, thrust washer and conical ring.
  Note!
  E34-0106
Do not mix up left and right articulation flanges. They are not interchangeable.
  V34-2043
ItemFlanged shaftDimension “a”
1left-hand side of gearbox casing57 mm
2right-hand side of gearbox casing48 mm

–  Remove front exhaust pipe, if necessary: → 4 cyl. injection engine, mechanics; Rep. Gr.26
   
–  Fit securing bolt to articulation flange. Use tool -T20005- and tighten the bolt to 25 Nm.
–  Fit driveshaft to gearbox flange and tighten bolts to 45 Nm.
Articulation flange oilseal, right:
–  Fit counterweight to the sub-frame.
t  Assembly position: According to the mark made duing disassembly. If no mark was made, the counterweight should be fitted to the sub-frame in such a way that the greatest distance between the edge of the counterweight and the securing bolts faces the front
–  Check gearbox oil level → Chapter
  E34-0093

Flanged shaft oil seals: removing and installing > < Articulation flange oilseals: removing and fitting|Removal