Checking the functioning of the gear lever operation |
The gear lever should be in neutral, in the track of 3rd/4th gear. The lower part of the gear lever should be vertical. |
–
| Press the clutch pedal down and go through all the gears twice, leaving the gear lever in neutral. |
Note! Going through the gears must be done smoothly and without any interference nor difficulty. |
–
| Check that the blocking of reverse gear works correctly. |
–
| If it still jams or there is difficulty when repeatedly engaging a gear, make the fine adjustment. |
–
| Fix the knob on the gear lever and insert it right on. |
–
| Tighten the clamp for the gear lever knob. |
Note! For tightening the clamp, tool -T20072- can also be used. |
–
| Fit the hood onto the centre console. |
Vehicles with centre console |
Vehicles without centre console |
–
| Fit the hood to the mounting. |
|
|
|