seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Assembly > < Selector box casing: dismounting and assembly

Leon Mk2

Dismounting
Dismounting
–  Disconnect the negative terminal of the battery.
–  In vehicles fitted with a coded radio, first consult the anti-theft code.
Vehicles with centre console
–  Take the hood mounting off of the centre console → Body - interior assembly work; Rep. Gr.68.
   
–  Turn the hood inside out and remove the gear lever knob by loosening the clamp.
–  Undo the clamp nuts -arrows- on the centre console.
Vehicles without centre console
–  Loosen the mounting cover.
–  Turn the hood inside out and remove the gear lever knob by loosening the clamp.
  V34-2478
–  Remove the screw -arrow 1- and nuts -arrow 2-.
–  Dismount the front exhaust pipe → Rep. Gr.26.
  N34-0430
–  Dismount the front bridge-piece -arrow-.
  N34-0141
–  Dismount the rear bridge-piece -arrow-.
–  Dismount the front thermal protecting plate.
–  Disconnect the rear exhaust pipe from the brace and secure it adequately.
  N34-0147
–  Loosen the clamp -arrow- and separate the drag link from the elbow toe.
–  Take out the screws securing the selector box casing to the body and remove it downwards, together with the drag link.
  V34-1401

Assembly > < Selector box casing: dismounting and assembly