SEAT Workshop Service and Repair Manuals > Leon Mk2 > 09G automatic gearbox | Automatic gearbox, control, assembly, housing | Gearbox: Removing and installing | Gearbox: fitting

Torque settings

Gearbox to engine

-	Drive plate to converter

60 Nm

q	6 units; removal and assembly with the tool -V/175-

M12 bolts

With adjustment sleeves -arrows-

80 Nm

q	65 Nm if the socket wrench -T10179- is used

M12 bolts

80 Nm

q	65 Nm if the socket wrench -T10179- is used

M10 bolts

40 Nm

q	These bolts are located in the flange

Tightening torques of the gearbox support unit

Console to gearbox -bolts B-

l	First tighten these bolts and then the console to gearbox housing support.

30 Nm and turn a further 90°

Console to gearbox housing support -bolts A-

40 Nm and turn a further 90°

SEAT Workshop Service and Repair Manuals