seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Tightening torques > < Removal:

Leon Mk2

Installation
   
Installation
Installation is carried out in the reverse order, noting the following:
  Note
t  Oil for the hydraulic circuits → Electronic spare parts catalogue „ETKA“
t  Replace the seal -2-.
t  Secure the connecting pieces of the hose lines with securing clips → Electronic spare parts catalogue „ETKA“.
–  Fit the pipe and hose assembly using pressure, together with the new O-ring -2-, on the clutch slave cylinder, until the safety fastener -3- is audibly secured.
–  Pull pipe and hose assembly to check it is properly secured.
–  Bleed air from hydraulic clutch system → Chapter.
–  Fit the battery → Rep. gr.27.
  A30-0130

Tightening torques > < Removal: