Leon Mk2
| 5th gear: Assembly overview |
| 1 - | Grommet |
| q | For the needle bearing of 5th gear |
| q | Release along with the rigid radial bearing bush allotment → Chapter |
| q | Replace along with → Item |
| 2 - | Needle bearing |
| q | For 5th gear |
| q | removing and fitting → Chapter |
| q | Replace along with → Item |
| 3 - | 5th gear mobile pinion |
| q | removing and fitting → Chapter |
| 4 - | Synchromesh ring of 5th gear: |
| q | removing and fitting → Chapter |
| q | Check for wear → Chapter |
| 5 - | Mobile sleeve with 5th gear synchromesh |
| q | removing and fitting → Chapter |
| q | Dismantling and assembling → Chapter. |
| 6 - | Circlip |
| q | replace |
| q | Determining thickness → Anchor |
| 7 - | Stop ring |
| q | Prevents locking pieces from moving out |
| q | removing and fitting → Chapter |
| 8 - | Spring |
| q | Fitting position: the bent end should point towards the locking pin |
| 9 - | Mobile sleeve of 5th gear |
| 10 - | Synchromesh for 5th gear |
| 11 - | Locking keyways |
| q | 3 off |
| 12 - | Spring |
| q | Fitting position: the bent end should point towards the locking pin |
