Leon Mk2
Input shaft, secondary shaft (thrust pinion shaft), differential and gear prongs: removing and fitting |
Remove and install the cover of the gearbox casing, the clutch casing, the selector rod with cover, the input shaft, the secondary shaft (thrust pinion shaft), the differential and the gearbox operating mechanism |
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter. |
Special tools and workshop equipment required |
t | Counterhold -VW 313-, see equivalent → Anchor |
t | Pressure plate -VW 401-, see equivalent → Anchor |
t | Pressure plate -VW 402-, see equivalent → Anchor |
t | Terminal crimper -VW 412-, see equivalent → Anchor |
t | Adapter -T10235- |
t | Terminal crimper -VW 407-, see equivalent → Anchor |
t | Tube element -VW 418 A- |
t | Thrust pad -3074- |
t | pressure tool -T10080- |
t | Base for fitting -T10083- |
t | Dished washer -T10083/1- |
t | Collecting tray -V.A.G 1306-, see equivalent → Anchor |
t | Thrust pad -T10375- |
t | Torque wrench -V.A.G 1331-, see equivalent → Anchor. |
t | -1-Two-arm puller -Kukko 20/10- |
t | -2-Divider -Kukko 18/1- |
t | -3-Splitter -Kukko 17/1- |
t | Sealant -AMV 188 200 03- |
t | Hexagon socket head bolt -M8 x 15- |
|
|