–
| Loosen oil level test and filler plug. |
–
| Screw the oil release control lid and tighten with the appropriate torque → Chapter. |
Note Oil level is correct when the oil reaches the bottom edge of filling hole. |
–
| Fill with new gear oil up to the correct level. |
–
| Unscrew control lid, start engine and let the gears work with engaged gear for about 2 minutes. |
–
| Stop the engine, remove oil cap and check level again, top up if necessary. |
–
| Screw the oil level and filling control lid and tighten with the appropriate torque → Chapter. |
–
| Install the middle soundproofing. |
|
|
|