seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Adjusting locking cable in vehicles after 07.01 > < Installing

Leon Mk2

Adjusting locking cable in vehicles before 06.01
Adjusting locking cable in vehicles before 06.01
  Warning
The description below for the adjustment of the locking cable must be strictly adhered to.
Adjustment prerequisites
l  Locking cable in installation position.
l  Centre console removed.
l  Selector lever in position “P”.
l  Ignition key in withdrawal position.
Adjustment procedure
   
–  Unscrew bolt -arrow- on the support bracket.
  N37-0834
–  Push on locking cable adjustment gauge -3352 A- between locking lever -1- and locking cable eye -2-.
–  To compensate for play, pull cable sleeve forwards until you can feel resistance.
–  Hold the cable sleeve tight in this position.
–  In this position, it must be possible to remove and insert adjustment gauge -3352 A- easily.
  N37-0828
–  Tighten bolt -arrow- on the support bracket → Item.
–  Remove adjustment gauge.
–  It is now essential to check function of ignition key withdrawal lock → Chapter.
  N37-0834

Adjusting locking cable in vehicles after 07.01 > < Installing