Leon Mk2
Exploded view - clutch hydraulics |
1 - | Brake fluid deposit |
q | Availability → Electronic parts catalogue (ETKA) |
2 - | Circulation hose |
3 - | Seal |
q | Seals and supply hose are listed as one replacement part. |
q | The seals must be located in supply hose |
4 - | Master cylinder |
q | Availability → Electronic parts catalogue (ETKA) |
q | Removing and installing → Chapter>>>>>>>> |
5 - | Clip |
q | Pull clip out to stop to remove pipe/hose line |
6 - | Mounting bracket with clutch pedal |
q | Availability → Electronic parts catalogue (ETKA) |
7 - | Bearing shaft |
q | Availability → Electronic parts catalogue (ETKA) |
q | For plunger/master cylinder |
8 - | Conical hexagon bolt |
q | → Item |
9 - | Seal / O-ring |
q | Pull onto line connection |
q | Lubricate with brake fluid before installing |
q | Whether a seal or an O-ring is used depends on the type of connection → Fig. |
q | Allocation → Electronic spare parts catalogue (ETKA) |
10 - | Pipe line |
q | Availability → Electronic parts catalogue (ETKA) |
11 - | Brake lines |
q | Various number |
q | Allocation → Electronic spare parts catalogue (ETKA) |
12 - | Spring retainer |
q | Fixed onto the bodywork |
q | For brake lines and pipe/hose line |
13 - | Hexagonal bolt |
q | → Item |
14 - | Clip |
q | To remove pipe, pull out clip to stop. |
15 - | Vent valve |
q | Purging the clutch control → Chapter |
16 - | Grease cap |
17 - | Slave cylinder |
q | Allocation → Electronic spare parts catalogue (ETKA) |
q | Removing and installing → Chapter>>>>>>>> |
|
Item | Material of line connection |
1 | Line connection with circumferential groove -arrow 1- |
2 | Line connection with shoulder -arrow 2- |
3 | Line connection with shoulder -arrow 2- and circumferential groove -arrow 3- |
|