Leon Mk2
| Adjustment and marking of final drive gear set |
| 1 - | „43185“ number of matched pair of gears |
| 2 - | Allowance „r“ is based on the master gauge used on the test machine in production. The allowance „r“ is always given in 1/100 mm. Example: „29“ indicates r = 0.29 mm |
| Ro - | Length of test machine master gauge |
| Ro - | Ø des crown wheel188 mm = 59.65 mm |
| R - | Actual distance between centre axis of crown wheel and face of pinion shaft in position of quietest running for this gear set. |
| Vo - | Hypoid offset |
