seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Installing > < Renewing oil seal for left flange shaft

Leon Mk2

Removing
Removing
l 
–  Remove front left wheel bolts.
–  Raise vehicle.
–  Remove left wheel.
–  Remove noise insulation tray.
–  Turn steering to left lock.
–  Unbolt drive shaft from flange shaft.
   
–  Separate -arrow- left coupling rod from anti-roll bar.
  N40-0099
–  Separate threaded connection between left wheel bearing housing and lower swivel joint -arrow-.
–  Swing wheel bearing housing outwards.
–  Remove left drive shaft between subframe and gearbox.
–  Lift drive shaft and secure to suspension strut with wire.
–  Remove flange shaft securing bolts. Screw two bolts into flange and counterhold flange shaft using a lever.
–  Place drip tray under gearbox.
–  Pull out flange shaft with compression spring.
  N40-0118
–  Pull out flange shaft oil seal using multi-purpose tool -VW 771- and puller hooks -VW 771/37-.
  N39-0911

Installing > < Renewing oil seal for left flange shaft