SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Installing >
< Removing and installing selector lever housing and selector lever
Leon Mk2
6-speed manual gearbox 02N
Gearbox mechanics,operation, construction,diff.
Repairing selector mechanism / moving_and_installing_selector_lever_housing_and_selector_lever/">Removing and installing selector lever housing and selector lever
Removing
Removing
Removing
–
First check whether a coded radio is fitted. If so, obtain anti-theft code.
–
With ignition switched off, disconnect battery earth strap.
–
Detach front heat shield above exhaust system and push back between exhaust system and middle heat shield.
Gear selector cable
-A-
and gate selector cable
-B-
must be visible.
Note!
If heat shield cannot be pushed back, remove catalytic converter and front heat shield
→ Rep. Gr.26
.
–
Unscrew nuts from selector housing
-arrows-
.
–
Carefully lever cover off centre console
-arrows 1-
and
-arrows 2-
.
–
Pull cover upwards off centre console.
–
Then destroy clamp
-arrow-
and pull off selector lever knob with cover.
–
Remove centre console
→ General body repairs, interior; Rep. Gr.68
.
–
Lever securing clips
-arrows-
off support bracket on gearbox housing.
–
Remove securing clip from gear selector cable
-A-
and gate selector cable
-B-
.
To do this, raise tab using screwdriver
-arrow 1-
and press off securing clip
-arrow 2-
.
–
Remove gear selector cable
-A-
from selector lever retainer.
–
Remove gate selector cable
-B-
from retainer of gate selector lever.
–
Remove selector lever housing with selector lever.
6-speed manual gearbox 02N
Gearbox mechanics,operation, construction,diff.
Repairing selector mechanism / moving_and_installing_selector_lever_housing_and_selector_lever/">Removing and installing selector lever housing and selector lever
Removing
Installing >
< Removing and installing selector lever housing and selector lever