–
| Lay thicker thrust washer -A- on wheel rollers and rollers in plate housing. |
–
| On top of that, lay needle thrust bearing -B- and thin thrust washer -C- for needle thrust bearing. |
Note! t
| The individual needle thrust bearing packets -1- through -3- are allocated according to the diameters of the pistons in Haldex coupling cover. |
t
| Ensure that gap -arrow- between needle thrust bearing packets -2- and -3- is of uniform size all around the circumference. |
–
| Insert dished spring -4- with greater diameter (concave side) facing ring ( → Anchor, fig. N39-1043). |
|
|
|