–
| To check gear oil, remove oil plug -arrow-. |
Oil level is correct when gearbox is filled to lower edge of filler hole. |
–
| Screw in new plug -arrow-. |
–
| Tighten oil plug -arrow- to specified torque → Item. |
When filling with fresh oil, note following: |
–
| Remove oil plug -arrow-. |
–
| Fill with gear oil to lower edge of filler hole. |
–
| Screw in plug -arrow- with new seal. |
–
| Start engine, engage gear and allow gearbox to turn for approx. 2 minutes. |
–
| Stop engine and remove plug -arrow-. |
–
| Top up oil to lower edge of filler hole again. |
–
| Screw in new plug -arrow-. |
–
| Tighten oil plug -arrow- to specified torque → Item. |
|
|
|