Leon Mk2
Electrical and electronic components and their locations |
1 - | Four-wheel drive control unit -J492- |
q | Location → Fig. |
q | Forms a unit together with oil pressure control motor -V184- and hydraulic temperature sender -G271-. |
q | Can be checked in “guided fault finding” of vehicle diagnosis, testing and information system -VAS 5051-. |
q | Removing and installing → Chapter |
2 - | Engine control unit |
q | Location → Fig. |
q | The following signals are transmitted to the four-wheel drive control unit -J492- via the data bus: |
q | Engine speed. |
q | Accelerator pedal position |
q | Engine torque |
q | Removing and installing → Rep. Gr.23 of respective engine code or → Rep. Gr.24 of respective engine code |
3 - | ABS control unit with EDL -J104- |
q | Location: on hydraulic unit, on left in engine compartment |
q | The following signals are transmitted to the four-wheel drive control unit -J492- via the data bus: |
q | Rotational speeds of wheels |
q | Longitudinal acceleration |
q | Brake actuation |
q | Removing and installing → Brake systems; Rep. Gr.45 |
4 - | Haldex coupling pump -V181- |
q | Location → Fig. |
q | Can be checked in “guided fault finding” of vehicle diagnosis, testing and information system -VAS 5051-. |
q | Removing and installing → Chapter |
5 - | Diagnostic connection |
q | Location for vehicles through 05.00: beneath ashtray insert in centre console |
q | Installation location for vehicles from 06:00: located beneath driver side compartment. |
6 - | Brake light switch -F- |
q | Location: on brake pedal |
q | Can be checked in “guided fault finding” of vehicle diagnosis, testing and information system -VAS 5051-. |
q |
q | Removing and installing → Brake systems; Rep. Gr.46. |
7 - | Handbrake warning switch -F9- |
q | Location → Fig. |
q | Can be checked in “guided fault finding” of vehicle diagnosis, testing and information system -VAS 5051-. |
q | Removing and installing → Brake systems; Repair group 46; Assembly overview - handbrake lever |
|
|
|
|