t
| Check grooves -arrow 1- of synchro-ring -A- and inner ring for flat spots (worn grooves). |
t
| If synchro-rings are coated, coating must not be damaged. |
t
| If an intermediate ring -B- is installed, check the outer friction surface -arrow 2- and inner friction surface -arrow 3- of this intermediate ring for “scoring”, “signs of abnormal wear” and “blue discolouration (due to overheating)”. |
t
| Check cone of synchromeshed gear for “scoring” and “signs of abnormal wear”. |
t
| Moisten synchromesh mechanism with gear oil before installing. |
|
|
|