Move the clutch pedal to the rest position, up to the limit.
–
Fit the safety clip -2- onto actuating bar -1- of the master cylinder.
–
Insert a spacer -A- between the clutch and the top limit and press the clutch pedal towards the spacer. Spacer length = approx. 40 mm (eg. 1/2”).
–
Block the clutch master cylinder on the support stand -arrow 1- and -arrow 2-.
–
Push the actuating bar -1- of the clutch master cylinder towards the -arrow- until the safety clip -2- until safety clip audibly clicks into clutch pedal housing.