–
| Remove protection hood on brake bleeder bolt -arrow- and connect hose -A- of air bleeding bottle to this bolt. |
–
| Now start up air bleeding apparatus. |
l
| Working pressure: 2.0 bar, positive pressure |
–
| Once air bleeding bottle hose is connected, open air bleeding element bolt and bleed approx. 100 cm3 of brake fluid. |
–
| Close the bolt on the air bleeder element. |
–
| Quickly operate pedal from limit to limit 15 times. |
–
| Open air bleeding element bolt and bleed another 50 cm 3 of brake fluid. |
–
| Tighten the bolt on the air bleeder element using → Item |
–
| Once the air bleeding operation is completed, operate the clutch pedal several times. |
–
| Bleed the system once more if necessary. |
–
| Remove the bleed hose and fit the protection hood. |
–
| Remove the brake bleeder -SAT 1175B- from brake fluid reservoir. |
|
|
|