Leon Mk2
Gear mechanism and housing - assembly overview |
1 - | Countersunk bolt, 25 Nm |
2 - | Articulation flange |
q | Removing and installing → Chapter |
3 - | Sealing cap |
4 - | Circlip |
5 - | Reverse light switch, -20 Nm |
6 - | Seal |
q | replace |
7 - | Oil empty plug |
q | Hexagon socket head bolt, 30 Nm |
q | Multi-point socket head bolt, 45 Nm |
8 - | Seal |
q | replace |
9 - | Locking bolt for the selection shaft - 30 Nm |
10 - | Bolt 15 Nm +90° (1/4 turn) |
q | With captive washer |
q | replace |
11 - | Bolt 15 Nm +90° (1/4 turn) |
q | Without washer |
q | replace |
12 - | Gear selection mechanism |
q | Dismantling and assembling → Fig.. |
q | Removing with gearbox installed: |
– | Remove the battery and its bracket |
– | Remove the control cables and gear selector mechanism. |
– | Unscrew the locking screw and pull out the gear mechanism → Item. |
13 - | 20 Nm |
q | replace |
14 - | O ring |
q | replace |
15 - | clutch housing |
q | Repairs → Chapter |
16 - | Gearbox |
q | Repairs → Chapter |