seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing master cylinder|Installation > < Removing and installing master cylinder

Leon Mk2

Removal:
Removal:
–  Removing the support stand → Chapter.
   
–  With the pliers -T20059B- release the clutch master cylinder actuating rod housing.
  E30-10001
–  The points of the pliers -T20059B- have been prepared to the specified dimensions: left hand side 7.5 mm and right hand side 3.5 mm.
  E30-10011
–  Insert a spacer -A- between the clutch pedal and the top limit and press the pedal towards the spacer. Length of the spacer = approx. 40 mm (i.e. 1/2").
–  Disengage safety bracket -B- and detach master cylinder from support stand -arrow 1- and -arrow 2-.
  A30-0119

Removing and installing master cylinder|Installation > < Removing and installing master cylinder