| t
| Check the grooves -arrow 1- on synchro-ring -A- and on inner ring for wear (flattened sections in grooves). |
| t
| Make sure that the coating of coated synchro-rings is not damaged. |
| t
| If an intermediate ring -B- is fitted, check the outer contact surface -arrow 2- and inner contact surface -arrow 3- of the intermediate ring for „scoring“ and „visible traces of wear“. |
| t
| Check cone of synchromeshed gear for „scoring“ and „signs of abnormal wear“. |
| t
| Fit them lubricated with gear oil. |
|
|
|
