seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Gear oil: allow to drain > < Check and refill
Preparations
Preparations
Gear oil for manual gearboxes → Electronic parts catalogue „ETKA“.
–  Remove complete air filter housing → Rep. gr.23 or → Rep. gr.24.
   
–  Remove bolts -1- and - 2- and remove central soundproofing panel.
  A10-10761
Clean gearbox.
  Caution
A pivot pin for the selector forks in the gearbox must be removed in order to drain the gear oil.
To prevent the positions of the selector forks from being changed, e.g. due to accidental operation of the selector mechanism, the selector shaft must be locked in position.
Secure the selector shaft lever as follows:
  N01-0453
–  Press selector shaft down (direction of -arrow 1-).
–  While pressing selector shaft down, move angled rod -A- upwards in direction of -arrow 2-. At the same time press angled rod carefully into selector shaft until it engages.
  N34-0881

Gear oil: allow to drain > < Check and refill