Leon Mk2
Housing and gear operation mechanism: Removing and installing |
1 - | 25 Nm conical bolt |
2 - | Flange shaft with compression spring |
q | Removing and installing → Chapter>>>>>>>> |
3 - | Torx socket head bolt, 25 Nm |
q | For the reverse gear shaft support |
q | Self-locking |
q | Always replace |
4 - | Torx socket head bolt, 30 Nm |
q | For the reverse gear shaft support |
q | Self-locking |
q | Always replace |
5 - | O ring |
q | Always replace |
6 - | Bearing pin |
7 - | 25 Nm |
8 - | 25 Nm |
9 - | Sealing cap |
10 - | Multi-point socket head bolt 25 Nm |
q | For the reverse gear/shaft support |
q | Always replace |
11 - | Gearbox |
q | Repairs → Chapter |
12 - | clutch housing |
q | Remove together with 5th / 6th gears → Chapter |
q | Repairs → Chapter |
13 - | Hexagonal head bolt, tighten to 25 Nm + 1/4 turn (90°) |
14 - | Gear selection mechanism |
q | (Selector forks) |
q | Repairs → Chapter |
15 - | Multi-point socket head bolt 25 Nm |