seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Line for clutch mechanism: removing and installing > < Removing

Leon Mk2

Installing
Installing
Installation is carried out in the reverse order, noting the following:
l  The securing bolts for the slave cylinder must be tightened only in small stages.
Otherwise, the tabs with the bolt holes may break off.
–  Bolt on slave cylinder with release bearing → Item.
   
–  Check O-ring -3- on slave cylinder.
–  Press bleeder -4- onto slave cylinder connection -1- until securing clip -2- engages audibly.
–  Check by pulling on bleeder.
–  Install gearbox .
–  Hydraulic clutch system: bleeding of air → Chapter.
  A30-0137

Line for clutch mechanism: removing and installing > < Removing