seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing slave cylinder with release bearing > < Assembly overview - clutch release mechanism

Leon Mk2

Removing line and bleeder from and installing on slave cylinder
Removing line and bleeder from and installing on slave cylinder
   
Removing line -4- and installing on bleeder -1-
–  To remove, release securing clip -2- with a screwdriver or pointed object and pull line -4- off bleeder -1-.
–  To install, push line -4- with O-ring -3- onto connection of bleeder -1- until securing clip -2- engages audibly.
–  Test line by tugging on it.
  A30-0136
Removing bleeder -4- from and installing on slave cylinder
–  To remove, release securing clip -2- with a screwdriver and pull bleeder -4- off slave cylinder -1-.
–  To install, check O-ring -3- on slave cylinder. Press bleeder onto slave cylinder connection until securing clip engages audibly.
–  Check by pulling on bleeder.
–  Hydraulic clutch system: bleeding of air → Chapter.
  A30-0137

Removing and installing slave cylinder with release bearing > < Assembly overview - clutch release mechanism