Leon Mk2
| Gearbox housing - assembly overview |
| 1 - | Gearbox |
| q | If replaced: Adjust the the output shaft and the differential → Chapter |
| 2 - | Sealing cap |
| q | Removing → Fig. |
| q | Pressing on → Fig. |
| 3 - | Oil drain plug |
| q | Tightening torque → Fig. |
| 4 - | Seal |
| q | If fitted, always renew |
| 5 - | Filler plug |
| q | Tightening torque → Fig. |
| 6 - | Angled rod |
| q | For adjusting selector mechanism → Chapter |
| q | Can be renewed with gearbox assembled |
| q | Removing → Fig. |
| q | Installation position → Fig. |
| q | Pressing on → Fig. |
| 7 - | Mounting bush |
| q | For selector shafts |
| q | Pulling out → Fig. |
| q | Pressing on → Fig. |
| 8 - | Stop sleeve |
| q | Pressing out (gearbox dismantled) → Fig. |
| q | Driving out (gearbox not dismantled) → Fig. |
| q | Stop sleeve identification → Fig. |
| q | Drive in stop sleeve with shoulder → Fig. |
| q | Drive in stop sleeve without shoulder → Fig. |
| 9 - | Needle bearing |
| q | For reverse shaft |
| q | Always renew if removed |
| q | Pulling out → Fig. |
| q | Pressing on → Fig. |
| 10 - | Outer track, roller bearing |
| q | Output shaft for 5th, 6th and reverse gears |
| q | Removing and installing → Chapter>>>>>>>> |
| q | If renewed: Adjust 5th/6th and reverse gear output shaft → Chapter |
| 11 - | Shim |
| q | Output shaft for 5th, 6th and reverse gears |
| q | Adjustment overview → Chapter |
| 12 - | Outer track, roller bearing |
| q | For 1st - 4th gear output shaft |
| q | Removing and installing → Chapter>>>>>>>> |
| q | If replaced: Adjusting output shaft for 1st - 4th gear → Chapter |
| 13 - | Shim |
| q | For 1st - 4th gear output shaft |
| q | Adjustment overview → Chapter |
| 14 - | Outer track, roller bearing |
| q | For differential |
| q | Removing and installing → Chapter>>>>>>>> |
| q | If replaced, adjust the differential → Chapter |
| 15 - | Shim |
| q | For differential |
| q | Adjustment overview → Chapter |
| 16 - | Mounting bush |
| q | For selector shaft |
| q | Pulling out → Fig. |
| q | Pressing on → Fig. |
| 17 - | Sealing plug |
| q | Pressing out → Fig. |
| q | Pressing on → Fig. |
| 18 - | Seal |
| q | replace → Chapter |
