seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Output shaft for 5th / 6th and reverse gears: Assembly overview > < Table of shims

Leon Mk2

Checking adjustment
Checking adjustment
l  The required shim should already be fitted
   
–  Set up measuring tools and secure to clutch housing using bolt -arrow-.
–  Put the dial gauge (3 mm range) to „0“ with a pretension of 1 mm.
–  Loosen clutch housing/gearbox housing securing bolts diagonally until the bolts release the gearbox housing or output shaft.
–  If the correct shim has been selected, the dial gauge should now indicate a value between 0.15 and 0.25 mm.
  N35-0240

Output shaft for 5th / 6th and reverse gears: Assembly overview > < Table of shims