seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Table of shims > < Adjusting output shaft for 1st?-?4th gear

Leon Mk2

Shim calculation table
Shim calculation table
The specified bearing preload is obtained as follows:
Subtracting measured value (0.14 mm) from inserted shim (1.70 mm).
Add a constant value for preload (0.20 mm).
Example:
   
Installed shim1.70 mm
- Measured value0.14 mm
+ Preload (constant)0.20 mm
Thickness of shim1.76 mm

–  Determine thickness of shim from table → Chapter.
   
–  Detach gearbox housing and pull tapered roller bearing outer race out of gearbox housing.
A - Counter-support, e.g. -Kukko 22/2-
B - Internal puller 46...58 mm, e.g. -Kukko 21/7-
–  Remove inserted shim (1.70 mm thick) from gearbox casing.
  N35-0332

Table of shims > < Adjusting output shaft for 1st?-?4th gear