SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Oil pump: removing and installing >
< Removing and installing oil sump
Leon Mk2
Automated manual gearbox 02E for front-wheel drive
Gearbox mechanics,operation, construction,diff.
Removing and installing gearbox oil cooler
Removing and installing gearbox oil cooler
Removing and installing gearbox oil cooler
Special tools and workshop equipment required
t
Hose clamps, up to 25 mm -3094-
t
Torque wrench -V.A.G 1331-
Removal:
–
Shift selector lever into position „P“.
–
Remove battery and battery tray
→ Electrical system; Rep. gr.27
.
–
Lay lint-free cloths on gearbox oil cooler and gearbox to catch escaping coolant.
–
Clamp off coolant hoses using hose clamps -3094- and remove from cooler.
–
Remove bolts
-A-
and remove cooler
-B-
.
Caution
Do not allow coolant to drip into gearbox.
Installation
–
Renew O-rings
-C-
of gearbox oil cooler
-B-
.
–
Set gearbox oil cooler
-B-
in place, observing O-rings
-C-
.
–
Screw in new bolts
-A-
and tighten to 20 Nm + 90° (
1
/
4
turn).
–
Attach coolant hoses to gearbox oil cooler and remove hose clamps -3094-.
–
Install battery carrier and battery
→ Electrical system; Rep. gr.27
.
–
Check coolant level and top up with coolant as needed
→ Rep. gr.19
.
–
After repair, check oil level and top up
→ Chapter
.
Caution
Do not start engine while checking coolant level if gearbox oil has not yet been filled.
Automated manual gearbox 02E for front-wheel drive
Gearbox mechanics,operation, construction,diff.
Removing and installing gearbox oil cooler
Oil pump: removing and installing >
< Removing and installing oil sump