t
| Measuring tool -U 40807- |
Note t
| For the basic adjustment of the tailgate, the vehicle should be on the ground (with the weight resting on all four wheels). |
t
| The tailgate lock is attached directly onto the tailgate with bolts. There are no over-sized openings, and therefore it can not be adjusted. |
t
| The adjustment stops, as for other vehicles, can not be used to adjust the tailgate. They are only for stabilising or damping the tailgate. |
t
| For an exact tailgate adjustment, check, when closed, that all the spacings are within the specified tolerance → Rep. gr.00. |
The tailgate adjustment is described below: |
–
| Check the tolerances using the gauge -U 40807- → Rep. gr.00. |
–
| Adjust the tailgate using the slip plate → Chapter. |
|
|
|