Leon Mk2
| Trim of the front bumper (Altea XL Freetrack) - Assembly overview |
| 1 - | Lock carrier: |
| q | Removing and fitting → Chapter |
| 2 - | Front cross member |
| q | Removing and fitting → Chapter |
| 3 - | Headlight washer assembly |
| 4 - | Brand logo |
| q | Removing and fitting → Chapter |
| 5 - | Anagram grill |
| q | Removing and fitting → Chapter |
| 6 - | Outline of anagram grille. |
| q | Removing and fitting → Chapter |
| 7 - | Torx bolt |
| q | 5 Nm |
| q | 4 pieces |
| 8 - | Securing clip |
| q | 2 pieces |
| q | removing |
| – | Remove using the lever -T20043- . |
| 9 - | Front bumper trim |
| q | PP/EPDM Material |
| q | Removing and fitting → Chapter |
| 10 - | Bottom grille of the bumper trim |
| q | Removing and fitting → Chapter |
| 11 - | Bottom cover of the bumper trim |
| q | Removing and fitting → Chapter |
| 12 - | Bolt |
| 13 - | Plug. |
| q | There are two different cover models for vehicles with and without fog lamps → Spare parts catalogue |
| q | removing |
| – | Loosen the bolt -12-. |
| – | Remove the cover using the lever -U 30800- . |
| 14 - | Headlight washer cowling |
| 15 - | Centre sound proofing |
| q | Centre sound proofing (diesel engines) removing and fitting → Chapter |
| q | Centre sound proofing (petrol engines) removing and fitting → Chapter |
| 16 - | Bolt |
| q | 2.5 Nm |
| q | 8 pieces |
| 17 - | Bolt |
| q | 2 pieces |
| 18 - | Front wheel housing guard |
| q | Removing and fitting → Chapter |
| 19 - | Torx bolt |
| q | 2.5 Nm |
| 20 - | Screw dowel |
| 21 - | Bolt |
| q | 2.5 ± 0.25 Nm |
| q | 3 pieces |
| 22 - | Lateral guide |
| q | removing |
| – | Remove the front bumper trim → Chapter. |
| – | Unscrew bolts -21- and remove lateral guide -22-. |
| q | Installing |
| Installation is carried out in reverse order. |
| 23 - | Front wing trim: |
| q | Renew → Chapter |
