Leon Mk2
| Trim of the rear bumper (Altea XL Freetrack) - Assembly overview |
| 1 - | Rear bumper trim |
| q | PP/EPDM Material |
| q | Removing and fitting → Chapter |
| 2 - | Lower cover of the rear bumper trim |
| q | Removing and fitting → Chapter |
| 3 - | Bolt |
| q | 2.5 Nm |
| q | 7 pieces |
| 4 - | Torx bolt |
| q | 1.5 Nm |
| 5 - | Rear tyre well moulding |
| q | Removing and fitting → Chapter |
| 6 - | Screw dowel |
| 7 - | Guide for the bumper trim |
| q | removing |
| – | Remove the rear bumper trim → Chapter. |
| – | Extract the bolts -7- and remove the guide -6- . |
| q | Installing |
| Installation is carried out in reverse order. |
| 8 - | Bolt |
| q | 2.5 Nm |
| q | 4 pieces |
| 9 - | Moulding attachment |
| 10 - | Bolt |
| q | 2.5 Nm |
| q | 7 pieces |
| 11 - | Torx bolt |
| q | 20 Nm |
| q | 7 pieces |
| 12 - | Rear crossbeam |
| q | Removing and fitting → Chapter |
| 13 - | Torx bolt |
| q | 2.5 Nm |
| q | 2 + 2 each |
| 14 - | Guide for the bumper trim |
| 15 - | Torx bolt |
| q | 2.5 Nm |
| q | 4 + 4 each |
