seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Window well seal outside the front door: Removing and installing > < Synchronisation and storage of window course
Automatic raising or lowering: Commissioning
Automatic raising or lowering: Commissioning
  Note
After disconnecting and connecting the battery, the automatic raising and lowering of the windows is deactivated.
To renew the activation of this function after the battery is connected, the following procedure is carried out:
–  Close the vehicle from the outside via the drivers door. Make sure that all doors and windows are closed completely.
–  Unlock the vehicle and re-lock via the driver's door and, at the same time, leave the key in the lock position for at least 3 seconds.
The automatic raising/lowing of the windows is re-activated in this manner.
Errors in the electrical mechanism are shown by the flashing warning lights of all doors.
After the ignition is turned on, all warning lights of door trims flash for 15 seconds.
   

Window well seal outside the front door: Removing and installing > < Synchronisation and storage of window course