| Synchronisation and storage of window course |
WARNING | In the process of removal and fitting of the door glass, both front and back, the movement should be adapted and stored in the memory. |
|
Note | To synchronise and store the window course, it is necessary for the automatic opening and closing functions for the window to operate properly → Chapter. |
| –
| Move the window upwards last until it stops using the up / down switch. |
| –
| As soon as the window is in the uppermost position, actuate up switch again for 5 seconds. |
| –
| Then move the window downwards until it stops using the switch. |
| –
| As soon as the window is in the bottommost position, actuate down switch again for 5 seconds. |
| –
| Check the mode of operation of the automatic raising or lowering operation of the window. |
|
|
|
