seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Rear door hinges - assembly > < Rear door hinges - removing and assembly
Rear door hinges - removal
Rear door hinges - removal
   
–  Remove the multi-contact connector located below the rubber bellows -2- on the B-pillar.
  Note
The location of the hinges should be marked with an indelible marker to facilitate reinstallation of the door.
  E58-10004
–  Unscrew bolts -4-, -9- and -10- and remove door.
  Note
In order to protect the door, insert a suitable material between the door and the supporting surfaces.
–  Remove bottom B-pillar panelling → Bottom B-pillar panelling removal and installation; Rep. gr.70
–  Unscrew bolts -6- and remove upper hinge -2-.
–  Unscrew bolt -8- and -11- and remove lower hinge -7-.

   

Rear door hinges - assembly > < Rear door hinges - removing and assembly