seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Rear door - assembly > < Remove the rear door without the hinges

Leon Mk2

Remove the rear door with the hinges
Remove the rear door with the hinges
   
–  Remove the multi-contact connector located below the rubber bellows -2- on the B-pillar.
  Note
The location of the hinges should be marked with an indelible marker to facilitate reinstallation of the door.
  E58-10004
–  Remove bottom B-pillar panelling → Bottom B-pillar panelling removal and installation; Rep. gr.70
–  Unscrew bolts -6- of upper hinge -2-.
–  Unscrew nut -11- of lower hinge -7-.
–  Unscrew bolt -8- and remove door.

  Note
In order to protect the door, insert a suitable material between the door and the supporting surfaces.
   

Rear door - assembly > < Remove the rear door without the hinges