| –
| Before installing the bumper trim -1-, set adjuster screw -3- on support -5- so that dimension -a- = 21 mm + 1 mm. |
| –
| The support element -4- must be screwed in completely (left-hand thread). |
| –
| Adjuster screw -3- and support element -4- are supplied together with replacement support -5-. They cannot be ordered as separate replacement parts. |
| –
| When screwing in the bolt -3-, the support element -4- unwinds and then holds the support -2- for bumper trim -1- in the specified position. |
| –
| Support -5- is secured to bumper -6- with pop rivets. |
|
|
|
