| t
| Installation is described only for the left side. The procedures for the right-hand side are carried out analogue. |
| t
| If a protective side moulding is removed and reinstalled, only use adhesive remover -D 002 000 10- to remove the adhesive remains. |
| t
| Ensure that the adhesive surfaces are free of dust and grease. |
| t
| Bond protective side mouldings in place immediately after cleaning. |
| t
| Remove protective backing immediately before installation. Working temperature in workshop should be normal room temperature. |
| t
| Curing time after attaching protective side strip is about 4 hours at a room temperature of about 21° C. |
|
|
|
