Leon Mk2
Removing front door trim panel |
Carry out the following work: |
– | Observe fitting notes → Chapter |
– | Undo and remove front and rear bolts -6- on inner side of door. |
– | Warm bonding surface -2- on protective side moulding -1- with hot air blower -V.A.G 1416- before removing. |
– | Protect painted surfaces against damage, e.g. by sticking on textile adhesive tape. |
– | From above, guide wedges -T10383- between protective side moulding and body and prise off moulding with adhesive tape -2-. |