Leon Mk2
| Removing rear door cover |
| Carry out the following work: |
| – | Observe fitting notes → Chapter |
| – | Undo and remove front and rear bolts -6- on inner side of door. |
| – | Warm bonding surface -2- on protective side moulding -1- with hot air blower -V.A.G 1416- before removing. |
| – | Protect painted surfaces against damage, e.g. by sticking on textile adhesive tape. |
| – | From above, guide wedges -T10383- between protective side moulding and body and prise off moulding with adhesive tape -2-. |
