Leon Mk2
|
Note
|
Carry out following work: |
– | If fitted, remove window crank → Chapter. |
– | Remove front door trim → General body repairs, interior; Rep. gr.70. |
– | Remove cover → Chapter. |
– | Remove lock cylinder cover cap → Chapter and lock cylinder → Chapter on driver side. |
– | Remove cover cap on front passenger side → Chapter. |
– | Remove door handle → Chapter. |
– | Unscrew bolt -4- and remove base -3-. |
– | Remove door handle bracket -1- from front door -arrow d-. |
Detach cable |
– | Release holding device -5- and swivel it out of mounting in door handle bracket -arrow a-. |
– | Lift cable bolt out of mounting -arrow b-. |
– | Take cable -2- out of mounting bracket -1--arrow c-. |
|
Carry out following work: |
Install in reverse order of removal. When doing this, observe the following: |
Specified torque for bolt -4-: 1.5 Nm. |