SEAT Workshop Service and Repair Manuals > Leon Mk2 > Body | Bodywork, exterior installation work | Front door, central locking | Front door | Front door - removing and installing

Removing front door

–	Open the front door.

–	Remove rubber bellows -2- on A-pillar and disconnect all connectors.

–	Unscrew the nuts -1- from the top hinge.

–	Unscrew lower bolt -3- with spanner -T20042- from lower hinge.

Note

Always replace bolt -3- and nut -1-.

–	Lift the door up and out from the hinge bracket.

Note

When supporting any part between the front door and the surface over which it is supported, use appropriate material to protect the door.

SEAT Workshop Service and Repair Manuals