seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Front door electric window motor: Removing and installing > < Window well seal inside the front door: Removing and installing

Leon Mk2

Front door window guide: Removing and installing
Front door window guide: Removing and installing
t  Removing → Anchor
t  Installing → Anchor
Removing
–  Remove window frame → Chapter.
–  Front door glass: removal → Chapter.
–  Place the window frame on a workbench and at the same time, take care not to damage the part.
   
–  Unscrew the bolts -1- and -2-, and remove the A-pillar trim on the outside -3-.
–  Detach the window guide -4- from the window frame by pulling evenly on the entire frame -arrow B-, starting in the rear section.
  E64-10225
Installing
–  Install the window guide -4-, starting with the end -arrow A-.
–  Clip the window guide -4- evenly on the entire frame in the window frame flange.
–  Fit the A-pillar exterior cover -5- and tighten the screws -1- and -2- to a tightening torque of 1.3 Nm.
–  Installing front door window → Chapter.
–  Install the window frame and window riser unit → Chapter.
–  Continue installation in opposite order as removal
  E64-10228

Front door electric window motor: Removing and installing > < Window well seal inside the front door: Removing and installing