| t
| If an undamaged glass is re-used, a little before gluing reduce the sealant residue leaving only 1 or 2 mm, without damaging the primed layer nor the ceramic layer. |
| t
| The remaining material serves as an adhesive base for the new sealant paste. |
WARNING | The sticking contact surface should not be treated with primer or cleaning solution. Keep bonding surface clean and free from grease. |
|
| t
| Exception: if the fitting does not take place immediately after sanding down the remaining glue, this should be reactivated using the glass activator → Parts catalogue. |
| –
| Apply the (PUR) sealing paste . |
|
|
|
