One-touch up and down function: Putting into operation |
WARNING It is necessary to reactivate the one-touch up and down functions when: |
t
| the ground cable has been disconnected from the battery |
t
| the power window motor connector has been disconnected. |
|
Proceed as described in instructions below to activate one-touch up and down functions. |
l
| The ground cable must be connected to the battery |
l
| The doors must be closed. |
l
| The windows must be completely closed. |
–
| Lock vehicle doors by actuating key in door locking cylinder. |
Note The doors can also be locked by actuating the key in the passenger door, if the vehicle has a corresponding locking cylinder. |
–
| Unlock vehicle doors by actuating key in door locking cylinder. |
–
| Relock vehicle doors and hold key in locking position for at least one second. |
The one-touch up and down feature for the vehicle windows is then activated. |
l
| After connecting the ignition, the indicator lights in the locking button in the door liners for locking all doors from the inside flash for approximately 15 seconds. |
Caution If a malfunction is present in the vehicle power windows, the switches in the doors flash until the malfunction is remedied. |
|
|
|
|